Hanway  >  AI - Page Sitemap  >  Hanway forged supplier for workshop
Hanway forged supplier for workshop

Hanway forged supplier for workshop
  • Hanway forged supplier for workshop
  • Hanway forged supplier for workshop
  • Hanway forged supplier for workshop
  • Hanway forged supplier for workshop

Hanway forged supplier for workshop

Hanway is manufactured based upon the strict quality standards for furniture. It has been tested for appearance, physical and chemical properties, environmental performance, weather fastness.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Application Scope
OEM aluminum die casting manufacturer produced by Hanway is mostly used in the following aspects.Hanway has many years of industrial experience and great production capability. We are able to provide customers with quality and efficient one-stop solutions according to different needs of customers.Our products are produced in accordance with . All materials used in the products are well selected and purchased from our reliable partners, which guarantees the competitive price and stable performance.
Product Details
With a focus on product quality, Hanway strives for quality excellence in the production of OEM aluminum die casting manufacturer.Our products are produced in accordance with . All materials used in the products are well selected and purchased from our reliable partners, which guarantees the competitive price and stable performance.Under the guidance of market, Hanway constantly strives for innovation. OEM aluminum die casting manufacturer has reliable quality, stable performance, good design, and great practicality.
Company Advantages
1. Hanway is manufactured based upon the strict quality standards for furniture. It has been tested for appearance, physical and chemical properties, environmental performance, weather fastness.
2. This product has an super soft surface treatment with no pilling, shrinking or wrinkle, which usually appears on inferior bedding.
3. It is beautiful to look at, exciting to install, and a delight to own. And it sounds great in the rain.

◇◆ PRODUCT PARAMETERS

TECHNICAL DATA SHEET


ProcessTooling fabrication--Aluminium die casting----sand blasting----surface treatment---assembing--packing
MaterialAluminum:ADC12,ADC10,A360,A356,A380,A413,B390,EN47100,EN44100
Surface treatmentAnodizing, Powder Coating
ApplicationIndustrial parts
Certification

ISO9001/ IATF16949

ProductIndustrial parts and components




◇◆ PRODUCT  FEATURES
Hanway forged supplier for workshop-1

Feature

Aluminum die-casting enclouser has good anticorrosive property, wide temperature range and high mechanical strength. It can intercept EMC electromagnetic wave and has high waterproof property. It is widely used in power supply wiring and communication terminal wiring devices in coastal areas.


Hanway forged supplier for workshop-2

High density die-casting quality

high density die-casting quality makes multiple terminal structure to achieve zero porosity.


Hanway forged supplier for workshop-3

Surface

powder coating, salt spray test under neutral condition >500h.



Company Features
1. For several decades, Hanway metal products Co.,Ltd. has been engaged in the industry and has grown rapidly.
2. We put great emphasis on technology of metal casting parts .
3. We seek to forge mutually beneficial partnerships with our suppliers and to conduct responsible, ethical and sustainable business with them. We will always abide by ethical marketing rules. We uphold fair trade practices that do not harm clients' interests and rights. We'll never initiate any vicious market competition or partake in any business activities pushing up the price.
Product Description

Manufacture scrap steel cut wire shot 1.2mm for sandblasting

Polished and clean steel cut wire shot, can also provide roundness G1,G2,G3.

 

Major technological index of scrap steel cut wire shot 1.2mm for sandblasting

Name

scrap steel cut wire shot 1.2mm

Chemistry

(C)

0.45~0.75%

(Mn)

0.40~1.20%

(Si)

0.10~0.30%

(S)

≤0.004%

(P)

≤0.004%

Average Hardness

 

GP:41~53HRC

GL:53~60HRC

GH:60~65HRC

Deviation

±1.0HRC(±40HV)

 Durability

3000-4000times 

Minumum Density of scrap steel cut wire shot 1.2mm

7.8g/cm3

SAE Spec: 

0.6,0.8,1.0,1.2,1.4,1.5,1.8,2.0,2.2--3.0mm 

 

Features of scrap steel cut wire shot 1.2mm for sandblasting

1,High strength, high ductility, long service life;
2,Low breakage, low wear, little dust;
3,Low wear of the equipment, long life of accessory;
4,Reduce dedusting system load, lengthen usage time of dedusting equipments.

 

More pictures of scrap steel cut wire shot 1.2mm for sandblasting

 

 

 

Different length-to-diameter ratio of scrap steel cut wire shot 1.2mm

 

Conditioned scrap steel cut wire shot 1.2mm

 

Raw Material of scrap steel cut wire shot 1.2mm for sandblasting

Scrap steel cut wire shot 1.2mm in low price by our company are oil-free,rust-free and ashe-free,are in bright type,and do not break,crack and smash when in use,they have edges when they are used for the first time,the edges become round after being used for manny times, and their effect is about five times of the cast steel shot.

The product is applicable to cleaning various castings and foreings,removing dust and paint of steel plates and the like,and strengthening surfaces of machine parts and metal workpieces in the manufacture industries such as casting,machinery,automobile,shipbuilding,aircraft,container and the like,and is particularly applicable to high-speed,strength and big ball blast equipment for use,and the product has high recovery rate and can be recycled for use.

Any further info,pls contact with Lynn Luo,  Skype:live:lynn.luo

 

Usage/Application of scrap steel cut wire shot 1.2mm for sandblasting

Ship-building and ship-repariring
Coating and corrosion processing of steel structures
Railway vehicle coating
Preventing corrosion of engineering machiner
Preventing corrosion of welded pipes
Preventing corrosion of port machinery
Coating containers
Strengthening surfaces of castings and forgings
Intensifying surfaces of polished and sprayed shots
Cleaning non-ferrous and stainless steel

 

Packaging&Shipping

Packaging details of scrap steel cut wire shot 1.2mm for sandblasting

25kg /bag package 

40 bags/ Ton bags 

18-23 metric tons/ container

We can also pack the scrap steel cut wire shot 1.2mm according to customer's requirement.

 

Delivery details of scrap steel cut wire shot 1.2mm for sandblasting

7 days after receiving the advance payment

All production processes of Hanway metal casting parts are operated at the highest possible standards. Synwin can provide non woven fabric in various colors
Our strong supplier relationships allow us to source the highest quality materials to manufacture Hanway metal casting parts. Flower wrapping fabric can decorate flowers and make your packaging outstanding
metal casting parts is designed by professional designers with rich industry experience. Our non woven place mat can be used in restaurants, hotels and so on
The innovative design of metal casting parts has made it to rank top in the market. The fabric is water-proof and biodegradable
With zinc alloy die casting parts material, zinc alloy die casting parts has a better quality. The lifespan of non woven weed block mat can last 2 years
The product can withstand the stress from the body. The Achilles tendon protector reduces stress on the Achilles tendon by locking the shoe around the heel. As a sino-foreign joint venture, Guangdong Synwin Non Woven Technology Co., Ltd. is a high-tech company
Product Message
Contact