types of die casting how to make a statue with plaster of paris | ehow

by:Hanway     2019-08-16
Paris plaster is a widely used medium that can be used in many different types of modeling and art.One of its most useful features, however, is to make statues.Towels and clean.Feel free to prepare the materials as the plaster can be messy, especially if you like to do itContinue your arts and crafts.
Decide the shape and form you want to make as a statue.It is best to draw out the overall idea of the finished product so that it can be referenced at work.
Build an armature in the general shape of the statue.If it is a person's body, try to capture more forms than the body details.Armature will keep the shape of the plaster so you can carve the details and body later as a simplified skeleton.Connect the wire to the wood disc so you have a base that you can use.
Fill a shop bucket with cool water, about half.Pour the plaster slowly into the water.You might want to sift through the plaster with your fingers to break down the lumps.Continue to pour water until a mound is formed on the surface of the water, just like the gypsum Mountain under water.Mix the plaster with water until it is fully mixed.It will be a thin soup.Make the plaster thicker for later use.
Make a new small batch of plaster in Paris.Use about 2 inch of the water and mixture like step 3.Tear off an old cloth.Change the size and length as much as possible.Dip the cloth strips into a new batch of plaster before they become thicker.Cover the skeleton with plasterA covered cloth wrapped in it like a mummy.Let the cloth dry for about an hour.
Scoop out the thick plaster from the larger batches you made in step 3 and apply it to the skeleton.By applying the quality of the statue in a thick layer, but trying to maintain and form the shape, the quality of the statue is established.If it works on the face, it forms common features such as the inconspicuous nose, eyes and mouth.You will want to put more plaster on it as you will remove it most of the time.Don't make a fuss about details.
Use plaster engraving tools to carve statues that can be found in art supplies stores or online.Remove the plaster from the statue table to make details and defined shapes.Find out the different poses and poses that were not previously available.If you make a mistake, apply more plaster in this area and carve it again.It is better to use wet plaster, because it is easier to add to the statue before it dries.Continue to remove the plaster before the statue is completed.
Let the plaster solidify and dry for a day or two.Mist the plaster a little to make the drying slow.If the small features dry too early, they may fall off and your "David" may lose your nose or hands the next day.
Custom message
Contact