hot chamber and cold chamber die casting How Does an Anti-Scald Faucet Work?

Anti-A scalding valve is installed in the faucet to prevent hot water from leaving the faucet and accidentally scalding others.The valve is designed to protect children, elderly people and other skin-sensitive people.If the cold water supply is temporarily redirected to another faucet or flush toilet, they also provide protection against the sudden burst of hot water in the shower.Most anti-The scalding valve uses water pressure or water temperature to adjust the flow of hot water, but there are also ways to combine two methods.The pressure balance valve is the cheapest and simplest counterBurn valve to be made.In this design, a piston or diaphragm is installed in the faucet and responds to changes in water pressure.If cold water pressure drops for any reason, the piston moves to the appropriate position to limit the amount of hot water passing through the tap.If the temperature on the hot water heater changes at any time after reverse, this type of valve must be recalibratedA burn valve was installed.Although it is more expensive than the pressure balance valve, there is no need to recalibrate or adjust the constant temperature mixing valve or TMVs to suit the changes in the setting of the water heater.TMVs mix hot and cold water in one room before allowing them to flow through the tap.This chamber contains a thermostat element that expands and shrinks as the water temperature changes.The rise in temperature expands the element and blocks the hot water inlet to limit the number of entries into the mixing chamber.