die casting technology Metal Casting Standards

What is metal casting?
At the beginning of the metal casting, liquid casting is called slipped pouring into the mold.The molds set.The mold is dumped or flipped in order to discharge the excess liquid.In the spare step, use a tool called spare to trim the excess parts at the opening of the mold.Then smooth the opening around the mold with a sponge.
Stripping occurs when the mold is disconnected and the casting is taken out.Then send the casting to the casting finish.Casting finishing includes trimming the casting to remove all seams, wiping with a wet sponge, flushing with water, and then identifying with straps or stamps.The material of the casting can be tested to verify its composition, or the casting can be checked for external or internal defects.
The applicable metal casting standard depends on the type of metal used, the casting method and its stage in the manufacturing process.The steps to process the casting into a finished product are called "metal processing ".

ASTM A48-03 is the standard for gray iron castings.ASTM A436-84 is the standard of Austrian cast iron.ASTM A518 is the standard for corrosion resistance of silicon-containing cast iron.
ASTM A47 is the standard for ferritic iron castings.ASTM standard A220 is the standard of Pearl iron.ASTM A536-84 is the standard of iron.ASTM E30 outlines the test methods for cast iron.
ASTM E446 provides the process of Ray photography of steel castings with a thickness of up to 2 inch.Cast iron also has further ASTM standards according to expected use.ASTM A602-for example-94 cast iron for the automotive industry while ASTM A834-95 material specifications for general purpose cast iron are given.

ASTM B26M -12 is the standard of aluminum alloy sand casting.ASTM B686 is the standard for high-strength aluminum castings.
ASTM B179 is the standard for aluminum alloy ingots used during casting.ASTM B917 the process of heat treatment of aluminum alloy castings is outlined.
ASTM E88 is the process of sampling the cast metal form to verify its composition and composition.ASTM B557 is the process of tension testing for aluminum casting products.SAE standard ASM2771 involves heat treatment of aluminum alloy castings.

ASTM B80-09 is the standard for magnesium alloy sand casting.ASTM B93 is the standard for magnesium alloy ingots used in castings.ASTM B661 provides an overview of the process of heat treating magnesium alloys.ASTM B296 provides an overview of the names used for magnesium alloys, whether cast or forged.
ASTM standard B557 also includes the tensile testing process for casting products and casting products.ASTM B661 provides an overview of recommended practices for heat treated magnesium alloys.

ASTM B240-10 is the standard of zinc alloy and zincAluminum Alloy ingot for die casting.ASTM B86 is the standard for zinc alloy die casting.ASTM B908 provides an overview of the color codes used on zinc cast alloy ingots.ASTM E536 gives a test method for the analysis of zinc alloy.ASTM B792 is the standard for zinc alloy ingots for investment casting.
The main alloy used for zinc die casting alloys must comply with the material specifications in ASTM b327.ASTM B949 is a general standard for zinc alloy products, whether in ingots or plates.ASTM E536 provides an overview of the chemical analysis test methods for zinc alloys.

ASTM E2349-12 safety practices recommended during Metal Casting are given, although the safety regulations of OSHA are supported by law.ASTM F1002 outlines the performance requirements of protective clothing worn by workers around molten metal, while ASTM F1449 describes how to clean protective clothing.The American Foundry Association has its own standards for the foundry environment.