die casting manufacturer - the die casting process - cold chamber die casting
Have you ever thought about how metal toy soldiers are made or how some items are turned into the original shape?
The manufacturer does not shape these shapes like a pottery can, on the contrary, the usual process is through die casting.
Die casting is a process in which the molten metal is poured into the mold cavity under high pressure, and the mold cavity will also be formed unless a ventilation permit is provided for the mold maker to complete the mold or machine of the product.
Alloys that can be used can range from zinc and copper to magnesium, lead, and even tin and tin.
One of the processes used is to make the metal under high pressure.
This is the most common method of casting many other metal alloys, accounting for about 50% of all production.
On the other hand, the low method only uses about 20% of the time in special products, but its practicality increases in time.
Other methods are gravity die casting.
This is equivalent to the remaining percentage of production, with only a little left in the recently introduced process --
Squeeze die casting and vacuum die casting.
Aluminum is a lightweight alloy with high stability for different shapes, even thin walls, with good resistance and mechanical properties at the same time.
Due to the strength of aluminum at high temperatures and its electrical conductivity in heat and electricity, it has a great use in high-end product manufacturers.
Each metal alloy has its own special way, which is no different from aluminum.
In the process, aluminum does not always destroy or use molds to create a graphic closer to the finished product itself.
Other manufacturers using aluminum parts keep the mold permanent as it will provide external protection for the aluminum itself.
Due to the high melting point of aluminum, the cold chamber process is used for aluminum.
It is important to choose a trustworthy die casting manufacturer who knows the best way to customize the production process for the advantages of the parts or products they intend to manufacture.